Dylon Machine Fabric Dye Instructions – for a 40ºc pack For use in automatic front loading machines only. Suitable fabrics: cotton, linen, viscose and polyester/cotton mixes. Lighter shades on polyester mixes because pure synthetics do not pick up the dye. One pack will dye up to 600g /1lb dry weight fabric. Dyeing larger amounts (up to 1200g) will give a lighter colour. You will need: 500g / 1lb of salt (only in case of using 200g dyes -excluded salt-) Rubber gloves Approximate Weight Guide Item Weight Packs Required Jeans or Trousers 600g (1 1/4lbs) 1 2 Shirts 500g (1lb) 1 Bath Towel 600g (1 1/4lbs) 1 Double Sheet 600g (1 1/4lbs) 1 Double Duvet Cover 1200g (2 1/2lbs) 2 Curtains 2kg (4lbs) 4 How to use: 1. Weigh dry fabric to check that you have sufficient dye. Wash thoroughly, even if new, to remove stains or dressings which may not be visible to the eye. Leave damp. 2. Wearing rubber gloves, empty full contents of pack(s) into dry drum (not soap dispenser). 3. Add 500g of salt (only in case of using 200g dye), covering area where powder was added (only 500g of salt is required regardless of the number of packs of dye). 4. Put in damp, unfolded fabric. 5. Select and run a 40ºC cotton programme (do not use prewash, economy, quick wash or half load cycles) 6. When complete cycle has finished, add your usual washing detergent and run a 40ºC cotton programme. 7. When complete cycle has finished, remove your item from the machine, add your usual washing detergent and run another 40ºC programme with the machine empty to ensure that the machine is clean. Dry fabric away from direct heat and sunlight. Wash separately for the first couple of washes to remove any excess dye.
- Now with salt, making the process even easier
- Dylon Machine Dye for fabrics
- Each pack can dye 600g of fabric to full shade or 1.2kg of fabric to lighter shade.
- Colour mixing rules apply (e.g. red dye on blue fabric will give purple).
- To remove the colour first use DYLON Pre-Dye.